Short answer
Find the paint code on the label in the driver's door jamb, under the hood or in the trunk, or ask a dealer to look it up from your VIN. The code gives the factory color. The exact shade on your car today also depends on batch variation and fading, so a painter checks it against the car itself.
Where the paint code is
Every car carries its factory color as a short code on a label. Where the label sits depends on the maker, but these are the usual places to look:
- Driver's door jamb. Open the door and check the sticker on the edge of the door or the body pillar. This is the most common spot.
- Under the hood. On the underside of the hood, the strut towers or the radiator support.
- Inside the trunk. Under the floor cover or on the spare wheel well.
- Glovebox. Some makers put a parts label inside the glovebox lid with a list of codes, including the paint.
The code is usually short, a few letters and numbers, and is often next to a word like PAINT, COLOR, EXT or C/TR. If there are two codes, one is usually the body color and the other the interior trim. On some cars the label is easy to miss among the tire pressure and emissions stickers, so read every label.
If you cannot find it
Labels fade, peel off or get painted over in earlier repairs. If yours is gone, you still have options:
- Ask a dealer for your make. With the VIN, the 17 character number on the dashboard by the windshield and on your registration, the dealer's parts desk can usually look up the original color.
- Check your paperwork. The window sticker or build sheet from when the car was new often lists the color by name and code.
- Ask a body shop. A painter can read the color from the car itself and find the closest formula.
Remember that the VIN lookup gives the color the car left the factory with. If it has been repainted a different color since, the code will not match what you see.
Why the code is not the exact color
The code names a color, not your car's exact shade. Paint makers often keep several variants of one code, because batches from different plants and years come out slightly differently. Then the car spends years outside. Sun fades the pigment and dulls the clear coat, faster on the roof and hood than on the doors. A touch up pen or a panel sprayed straight from the code can look a shade off for those reasons alone.
That matters most for metallic, pearl and three stage colors, which are covered in what is the hardest paint color to match on a car.
How the exact shade gets found
For a repair, the code is where a painter starts, not where they stop. A careful match usually goes like this:
- Pull the formula for the code and its variants.
- Compare against the car in good light, on the panels right around the repair.
- Spray a test card and hold it against the car before any panel is painted.
- Tint the mix until the card matches the car as it is now.
- Blend the new color into the neighboring panels so there is no hard edge.
If you only need a touch up pen for small chips, the code is enough. If a panel is being painted, let the painter read the car. More on why paint drifts from its code is in our color matching guide.