What paintless dent repair covers
Paintless dent repair, usually shortened to PDR, fixes a dent without touching the paint. Instead of filling the low spot and respraying the panel, a technician reaches behind it with long steel rods and slowly massages the metal back up, a little at a time, until the surface is flat again. Where there is no way in from behind, special glue tabs are stuck to the outside and pulled.
The big win is that the original factory finish stays on the car. No filler that can shrink later, no new paint that has to be matched to the old, and nothing on the panel that tells a buyer the car was repaired.
PDR is the right tool for damage like this:
- Door dings. The small round dents left by the car next to you in a parking lot.
- Shopping cart and knee bumps. Shallow dents low on doors and quarter panels.
- Soft dents on roofs, hoods and trunk lids. Something dropped or leaned on, with no break in the paint.
- Hail dents. Lots of small, round dents across the top of the car.
Signs your dent is a PDR candidate
Not every dent can be pushed out. These are the things a technician checks first, and you can check most of them yourself.
The paint is not broken
Look closely at the dent. No cracks, chips or flakes in the paint means the finish can survive the metal being moved.
The dent is round and soft
A smooth, rounded dent comes out far better than a sharp crease or a line where the metal has folded.
It is away from the edge
Dents right on the edge of a door, hood or wheel arch are hard to reach and the metal there is folded double.
The panel can be reached
Most doors, fenders, hoods and roofs can be accessed from behind. Some braced areas need glue pulling instead.
No earlier body filler
If the panel has been repaired with filler before, PDR can crack it. A paint thickness check shows this.
The dent is fairly fresh
Older dents can still come out, but metal that has sat bent for years can be stubborn. Getting it looked at soon helps.
Why PDR keeps the factory finish
Paint from the factory is baked on in a way no body shop can fully copy. It is usually the toughest, most even finish the car will ever have. Every conventional repair replaces some of it with filler, primer and new paint, and even a well matched respray can look slightly different in some lights or wear differently over time.
PDR skips all of that. The metal itself is moved back, so the paint that was there before the dent is the paint that is there after. That matters if you lease the car and have to hand it back clean, or if you plan to sell it and do not want a repainted panel to show up on an inspection.
How a paintless dent repair goes
Most PDR jobs follow the same few stops. The skill is in the patience at the push stage.
Look over
The dent is checked under a light board to read its shape, depth and whether the paint is intact.
Free estimate
You hear whether PDR will work, or whether the dent needs conventional repair, before any work starts.
Access
Trim panels, lights or liners come off where needed so the tools can reach behind the dent.
Push and tap
The metal is pushed up from behind in small moves and the high spots tapped down until the surface reads flat.
Check
The panel is checked again under the light from several angles to find anything left over.
Pickup
Trim goes back on and you drive away with the original paint.
When PDR is not the answer
A good shop will turn down a PDR job that will not come out well. Expect a conventional repair instead when the paint is cracked or chipped, when the dent has a sharp crease, when it sits on a body line or panel edge that has been bent, or when the panel was filled in an earlier repair. In those cases the dent is pulled, filled, sanded and painted, and the new paint is matched to the panels around it.
Sometimes the answer is both: PDR takes most of the dent out, then a small touch of conventional work finishes the spot. Either way you should know the plan before the car goes in. If the dent came from a crash rather than a parking lot, it is worth having the whole car looked at, because the same hit can damage parts you cannot see. Our collision repair page explains what that involves.
A dent is still a claim. The method does not change that.
If the dent came from something your policy covers, PDR is a repair like any other. Insurers often like it because it keeps the original paint. We work with your insurance company and handle the claim, and you can pick your own shop, whatever the insurance list says.
Honest look first
You hear whether PDR will work before any work starts.
Claim handled
We work with your insurer and do the paperwork for you.
Open 24 hours
Call 646-347-5520 whenever you notice the dent.
When the dent needs more.Same shop.
Some dents need filler and paint. Some arrive by the dozen after a storm. These pages cover both.
Paintless dent repair across New York City
Street parking, tight garages and crowded lots mean NYC cars collect door dings fast. We take PDR work from all five boroughs, Westchester and Long Island, and for Queens drivers the Forest Hills shop is close by. If the dent is part of an insurance claim, our insurance claims page explains how that works. To get a free estimate, call or send us the details, and see what other drivers have said on our reviews page.
PDR is not right for every dent. When the paint is cracked or the metal is sharply creased, the job moves to dent and scratch removal, with filler, paint and paint color matching. After a storm, PDR is often the main method in hail damage repair. Drivers from Yonkers and the rest of Westchester can bring dents to the same shop.
Read up first.Then call.
Plain answers to the questions drivers ask before and after a repair: what it involves, who pays, and what to check.
Paintless dent repair questions
What is paintless dent repair?
It is a way of removing dents by slowly pushing or pulling the metal back into its original shape, working from behind the panel or with glue tabs on the outside. Because nothing is sanded, filled or sprayed, the factory paint stays on the car.
Can every dent be fixed without paint?
No. PDR needs the paint to be intact and the metal to be stretched only a little. Cracked or chipped paint, sharp creases, dents right on a panel edge and damage on some heavily braced areas usually need a conventional repair with filler and paint instead. We will tell you which one your dent needs at the free estimate.
Does PDR work on aluminum panels?
Often, yes, but aluminum is stiffer and less forgiving than steel, so it takes more care and some dents that would come out of a steel door will not come out of an aluminum one. The only way to know is to look at the dent itself.
Will the dent be completely gone?
On a good candidate dent the repair is usually very hard to find, even in bright light. On a deeper or older dent the honest goal may be a big improvement rather than perfection. A good technician tells you which to expect before starting, not after.
Is paintless dent repair covered by insurance?
When the dent comes from something your policy covers, such as hail under comprehensive coverage or a covered collision, the repair method does not change that. Insurers often prefer PDR where it works because it keeps the original paint. We work with your insurance company and handle the claim. See our insurance claims page for how it works.
How do I get a quote?
Call 646-347-5520 any time, day or night, or send us the details on the contact page. Photos taken at an angle under good light help, but the free estimate is done on the car itself.
Got a dent? Call for a free look.
646-347-5520Open 24 hours.
Get a Free Estimate